Jaguar JLM10 31 99 552 GPS Receiver User Manual


 
11
Quick Overview
R
Pairing your phone
The following instructions describe how
to initiate Pairing your mobile phone to the
Jaguar system.
If there is no mobile phone Paired to the
vehicle system and the SIG screen is
displayed, Pairing may be performed as
follows:
Select Phone Mode (if not already
selected).
Use touch-screen keypad to enter the
following digit sequence and press the
Send/End button.
The display will then show the following
screen.
At the SIG**** screen the vehicle system
is waiting for communication with a
Bluetooth equipped telephone.
Check that your mobile phone is set to the
Jaguar Bluetooth system, using the menu
functions on the phone. Refer to the
handbook that was supplied with your
specific mobile phone.
When Jaguar device is found on the
mobile phone display, the phone will
prompt you to enter the pass key (1313)
on the mobile phone keypad.
When the above operation has been
completed and the phone is successfully
Paired and connected with the vehicle
system, the SIG* screen will be displayed.
Note: The screen may briefly change from
SIG**** to SIG whilst the system connects
the Bluetooth link, before the SIG* screen
is displayed.
##3#*#