Filter
Top Products
6
Ford/Lincoln/Mercury ISFD531
Operation
Selecting AUX:
Press the “AUX” or “SAT” button (SR123 icon on navigation radio) until
“AUX1” is displayed on the screen. When you press the “AUX” button, you
will see the corresponding “SAT” modes, a slight delay, and then the current
mode will be displayed.
Selecting between AUX1 / AUX2
Press the “AUX” or “SAT” button (SR123 icon on navigation radio) until
“AUX1” or “AUX2” is displayed on the screen.
General Motors ISGM531
Operation
Non Navigation
Selecting AUX
Press the “BAND” button a few times until “XM” is displayed on the screen.
Immediately turn the rotary knob in the top right hand corner to scroll through
available sources. Once “AUX1” is displayed, press the “FWD>>” button to
select it. If you are currently in “SAT” mode you will need to press the “►I
SEEK” button instead of “FWD>>” to select “AUX1” mode.
Selecting between AUX1 / AUX2
If you are currently in “AUX1” or “AUX2” mode turn the rotary knob to cycle
through the available sources. Once “AUX1” or “AUX2” is displayed on the
screen press the “FWD>>” button to select it.
Navigation radio operation
Selecting AUX
Press the “FM” button then press the “XM” button. Immediately turn the rotary
tune knob in the top right hand corner to scroll through available sources.
Once “AUX1” is displayed, press the “►” button on the screen to select it. If you
are currently in “SAT” mode, press the “SEEK ►I” button instead of the “►” button
to select “AUX” mode.
Selecting between AUX1 / AUX2
If you are currently in “AUX1” or “AUX2” mode, turn the rotary knob to
cycle through the available sources. Once “AUX1” or “AUX2” is displayed
on the screen, press the “►” button to select it..