Filter
Top Products
4
www.insigniaproducts.com
UNIVERSAL VEHICLE MOUNT
2 Align the clip stops with the edge of an
air vent louver, slowly push the mount
back until it clicks into place, then
release the mount. Make sure both
hooks are attached to the louver.
3 Position the kickstand so it rests against
other louvers or the dash for support.
4 Loosen the swivel head knob, adjust
the viewing angle, then fully tighten
the knob.
Caution: Do not adjust your Insignia
car mount while driving.
PLACING A SMARTPHONE IN
THE HOLDER
1 Repeatedly press the release button on
the side of the holder. The clamps open.
2 Unfold the feet on the bottom of the
holder.
3 Adjust the clamps to t the width of
your smartphone.
4 Place your smartphone in the holder
and close the clamps by squeezing
them together tightly until your phone
is secure.
ATTACHING TO AIR VENT
LOUVERS
1 Insert the swivel head into the slot on
the back of the holder and slide it into
place until it is secure.