Husqvarna CR 2002 Motorcycle User Manual


 
Applicazione
Filettatura
Application Threading
Application Filetate Nm Kgm Lb/ft
Nipplo fiss. raggi ruote
Nipple fixing wheel spoke M4x0,75 4,2÷4,6 0,43÷0,47 3,1÷3,4
Nipple de fixation rayons roue
Vite fiss. disco freno posteriore
Screw fixing rear brake disc M6x1 (*) 13,7÷15,7 1,4÷1,6 10,1÷11,6
Vis de fixation disque frein arrière
Dado fiss. corona posteriore
Nut fixing rear sprocket wheel M8x1,25(*) 32÷36 3,3÷3,7 2,4÷2,7
Ecrou de fixage couronne arrière
Perno ruota posteriore
Rear wheel axle M20x1,5 135,3÷149 13,8÷15,2 100÷110
Pivot roue arrière
Vite fiss. antivibrante tubo di scarico al telaio
Screw fixing exhaust pipe vibration-damper to the frame M6x1 10,3÷11,3 1,05÷1,15 7,6÷8,3
Vis de fixation antivibratoire tuyau d’échappement au cadre
Vite fissaggio silenziatore di scarico
Screw fixing exhaust muffler M6x1 10,3÷11,3 1,05÷1,15 7,6÷8,3
Vis de fixation silencieux d’échappement
Vite fissaggio antivibrante al tubo di scarico
Screw fixing vibration-damper to the exhaust pipe M6x1 10,3÷11,3 1,05÷1,15 7,6÷8,3
Vis de fixation antivibratoire au tuyau d’échappement
Vite fiss. indicatori di direzione (WR)
Screw for fixing the turn indicators (WR)
M6x1 5,6÷6,2 0,57÷0,63 4,1÷4,5
Vis de fixation indicateurs de direction (WR)
(*) “LOCTITE 243”
“LOCTITE 243”
“LOCTITE 243”
NOTA - Dove non diversamente indicato coppie di serraggio standard per le seguenti filettature: M5x0,8 4,9÷6,9 0,5÷0,7 3,6÷5
NOTE - If not otherwise specified, standard tightening torques for the following thread: M6x1 8,8÷9,8 0,9÷1 6,5÷7,2
NOTE - Sinon différemment spécifié, couples de serrage standard pour les filetages suivant: M8x1,25 21,6÷23,3 2,2÷2,4 16÷17,3
COPPIE DI SERRAGGIO / TIGHTENING TORQUES / COUPLES DE SERRAGE
258
IMP.12-250/360-2002 11-12-2001 11:45 Pagina 258