Filter
Top Products
Technical Data
313597E 21
Techn ical D ata
* Sound power measured per ISO-9614-2.
** Sound pressure was tested 3.28 ft (1 m) from equipment.
All trademarks mentioned in this manual are the property of their respective owners.
Maximum fluid working pressure
Transfer Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Dispense Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
100 psi (0.7 MPa, 7.0 bar)
50 psi (0.35 MPa, 3.5 bar)
Air pressure operating range
Transfer Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Dispense Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20-100 psi (0.14-0.7 MPa, 1.4-7.0 bar)
20-50 psi (0.14-0.35 MPa, 1.4-3.5 bar)
Air consumption at 70 psi (0.48 MPa, 4.8 bar), 20 gpm (76 lpm). . . . . . . .
Air consumption at 50 psi (0.35 MPa, 3.5 bar), full flow. . . . . . . . . . . . . . .
25 scfm
25 scfm
Fluid displacement per cycle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.17 gal. (0.64 liters)
Maximum values with water as media under submerged inlet conditions at
ambient temperature:
Maximum air consumption. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum free-flow delivery
Transfer Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Dispense Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum pump speed
Transfer Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel Dispense Pump. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Maximum suction lift (varies widely based on ball/seat selection and
wear, operating speed, material properties, and other variables) .
64 scfm
50 gpm (189 lpm)
38 gpm (144 lpm)
275 cpm
210 cpm
16 ft (4.9 m) dry, 29 ft (8.8 m) wet
Maximum size pumpable solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/8 in. (3.2 mm)
Recommended cycle rate for continuous use . . . . . . . . . . . . . . . . . . . . . . . 93 - 140 cpm
Recommended cycle rate for circulation systems . . . . . . . . . . . . . . . . . . . . 20 cpm
Sound Power*
at 70 psi (0.48 MPa, 4.8 bar) and 50 cpm . . . . . . . . . . . . . . . . . . . . . . .
at 100 psi (0.7 MPa, 7.0 bar) and full flow . . . . . . . . . . . . . . . . . . . . . . .
78 dBa
90 dBa
Sound Pressure**
at 70 psi (0.48 MPa, 4.8 bar) and 50 cpm . . . . . . . . . . . . . . . . . . . . . . .
at 100 psi (0.7 MPa, 7.0 bar) and full flow . . . . . . . . . . . . . . . . . . . . . . .
84 dBa
96 dBa
Operating temperature range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10°F-150°F (-12°C-65°C)
Air inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2 npt(f)
Fluid inlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 in. npt(f)
Fluid outlet size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 in. npt(f)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 lb. (10.5 kg)
Wetted parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . aluminum, TPC-ET, Acetal, PTFE
Non-wetted external parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . aluminum, coated carbon steel