Filter
Top Products
129
Date Format
(Advanced, International only)
Date Format changes the date format used by the unit This menu choice is
available only when in Advanced User Mode (see Setup Menu Tab: User
Mode). International Models only. Date Format selects the format for the date
display when Time + Date is selected as a Digital Readout on the Sonar View.
(see Select Readouts).
T
o change the Date Format:
1. Make sure you are in Advanced User Mode, then highlight Date Format
on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Date
Format. (mm/dd/yy, dd.mm.yy or yy.mm.dd, Default = mm/dd/yy)
Digits Format
(Advanced)
Digits Format allows you to add a tenth decimal place to readouts such as
Temperature and Depth. The format can be changed to small format, large
format or no format. This menu choice is available only when in Advanced User
Mode (see Setup Menu Tab: User Mode.)
T
o change the Digits Format setting:
1. Make sure you are in Advanced User Mode, then highlight Digits
Format on the Setup menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Digits
Format setting. (Small tenths, Large tenths, No tenths, Default = Small
tenths)
531528-1_A - 757c_787c2_&_787c2i_Man_Eng.qxp 10/16/2006 10:44 AM Page 13