Honeywell VX8 Automobile Parts User Manual


 
Connect USB Devices
The Thor VX8 provides the following Type A ports:
l internal USB port, accessible when the service lid is removed
l two external USB ports (see below)
l a USB port via a dongle cable attached to the multipurpose port.
Plug the desired device, such as a USB mouse or storage device, into the USB port. Refer to Start >Help and Support and
the documentation for your USB device for more information.
USB devices may be installed, removed or swapped without turning off the Thor VX8.
Connect Ethernet Cable
Note: Use of a shielded cable is required to maintain emissions and susceptibility compliance..
1. Insert the network cable and ensure it is firmly seated in the connector jack.
2. To remove the Ethernet cable, press the release tab on the cable end.
3-4