Filter
Top Products
Chapter 2 - Set Up A New Thor VX8
This page lists a quick outline of the steps you might take when setting up a new Thor VX8. More instruction for each step is
listed later in this guide. Please refer to the Thor VX8Reference Guide for additional information and instruction.
Contact Technical Assistance if you need additional help.
Note: Installing or removing accessories should be performed on a clean, well-lit surface. When necessary, protect the work
surface, the Thor VX8, and components from electrostatic discharge.
Hardware Setup
1. Connect accessories.
2. Connect power cable.
3. Secure all cables to the Thor VX8 with the Strain Relief Cable Clamps.
4. Press the Power key.
Software Setup
Hardware setup should be completed before beginning software setup.
1. Adjust date and time
2. Setup power management
3. Adjust speaker volume
4. Connect Bluetooth devices
5. Save settings with Restart
6. Enable the Soft Keyboard
2-1