Filter
Top Products
22 December 1999
CSPL0109K-2.DOC Page 5 of 5
POST-LEASE/CONSIGNMENT GUIDELINES
PART II – SPECIAL INSPECTION AND
GROUND RUN INSTRUCTIONS (CONT.)
ENGINE S/N _________________ POSITION ______________
MODEL _____________________
OPERATOR _________________________________________________________
DATE OF INSPECTION ________________________
PART II – B. GROUND RU N INSPECTION
ITEM INSPECTION/WORK TO BE PREFORMED RESULTS/REMARKS
1. Record start TGT: indicate engine position GI: ______ degrees C
With engine stabilized at GI, record N1, N2 Oil Press.: ______ PSI
N1 _______%
N2 _______%
Oil Temp ______ PSI
Vibration ______ IPS
2. Vibration, oil pressure, TGT, and oil temp.
Adjust parameters as required to meet
acceptable limits.
TGT _____ degrees C
3. Perform leak check with zone 1 and 2 cowls
open.
4. Adjust bleed bank trim as necessary per
Honeywell Engine Manual.
Bleed Bank Open: ___________ % N2
5. Adjust T.O. trust trim as necessary per
Honeywell Engine Manual.
T.O. Thrust Trim: ___________ % N2