22 December 1999
CSPL0109K-2.DOC Page 4 of 5
POST-LEASE/CONSIGNMENT GUIDELINES
PART II – SPECIAL INSPECTION AND
GROUND RUN INSTRUCTIONS
ENGINE S/N _________________ POSITION ______________
MODEL _____________________
OPERATOR _________________________________________________________
DATE OF INSPECTION ________________________
PART II – A. STATIC INSPECTION
ITEM INSPECTION/WORK TO BE PRFORMED RESULTS/REMARKS
1. Perform external inspection of engine pay
particular attention to the following: fuel/oil
leakage, missing hardware, loose bolts/fittings and
broken or frayed wiring.
2. Inspect all engine chip detectors and record
condition
FFCD
AGB CD
NO.2CD
NO. 4/5 CD
3. Inspect oil filter cap for impending bypass
indication
YES
NO
4. Inspect fan and 4
th
turbine disc assembly for FOD YES
NO
5. Rotate fan (N1) and note any binding or unusual
noise
If YES, indicate
damage