Filter
Top Products
C-VS-2400-CHGR_INST_12-07
3
Position sensor guard to align
with OEM floor nut serts
(Item 5)
Position rear-floor panel, continue to
align with OEM floor nut serts
(Item 6)
Place console housing assembly,
continuing to align with OEM
floor nut serts (Item 1)
Using OEM rear bolts or ¼” x ¾” sel
f
threading bolts, loosely attach main
console housing, sensor guard, and
rear cover panel to floor
(8mm or 7/16” socket)
Attach main console housing to
previously installed floor bracket
using ¼” carriage bolts and nylock
nuts. Use a scribe or awl to help align
(7/16” socket, awl)
Tighten all hardware
(7/16”, 8mm, 10mm socket)
Attach side trim panels using #10 x ½”
machine screw & washer
(Phillips screwdriver) (Item 3)
Wire and mount
equipment controls
2006 - 07 2008