Havis-Shields C-TCB-28 Automobile Accessories User Manual


  Open as PDF
of 3
 
C-TCB-28-INST-6-07
3
Insert inner telescoping pole
assembly and thread lock handle
into pole support base assembly.
Loosely attach lateral support brace
to TCB base using 5/16” flat washer
and 5/16” nylock nut
Tighten 5/16” nylock nut
Pre-drill floor of vehicle with 3/16”
drill bit. Use holes in the support
brace as a drill template
Attach support brace to floor using
¼” x 1” hex head lag bolts
Final Installation
Install C-3090-x laptop platform (sold separately)
 previous