Havis-Shields C-TCB-28 Automobile Accessories User Manual


  Open as PDF
of 3
 
C-TCB-28-INST-6-07
2
Install “Z” support bracket to base
assembly using ¼ x ¾” carriage bolt
and serrated nut.
Re-attach front bolts on passenger-
side seat through C-TCB base plate.
Remove front bolts on passenger-
side seat and position base assembly
in front of seat mount brackets.
Attach bracket to floor using ¼” x
1” hex head lag bolts
Tighten “Z” bracket to base
assembly.
Pre-drill floor of vehicle with 3/16”
drill bit Use holes in the “Z” bracket
as a drill template
CM93072-3
CM93146
CM93071-28W
Location of factory
seat bolts
 previous