Filter
Top Products
Page 6SKU 97214 For technical questions, please call 1-800-444-3353.
Insert the implement’s lower mounts inside the hitch hooks, and lock by pressing 4.
down the latch handles.
Check that all connections are tight before starting the work task.5.
If the tractor has stabilizer arms, they will not t into the Quick Hitch mounting 6.
area along with the lift arms. Use stabilizer chains, or some other longer
Mounting Pin (neither included) to fasten the Quick Hitch to the tractor.
Latch Handle
Latch Handle
Top Hook
Top Bracket
Lower Hook
Lower Hook
Linchpin (4)
Clevis pin (4)
R Pin (4)
Mounting Non-ASAE Implements
If the implement does not meet ASAE specications, use an Adapter Bracket (not 1.
included) to mount it to the Quick Hitch as illustrated on the next page.
Remove the Top Hook by taking out the two Hex Bolts (2), Lock Washers (6), and 2.
Nut (7). Save hardware.
Slide the Adapter Bracket over the Top Bracket of the Quick Hitch, and attach the 3.
top Link Pin.
For most implements, the front hole (closest to implement) is recommended for 4.
the best vertical alignment.
Attach the implement to the Adapter Bracket tab with a Link Pin.5.
Check that all connections are tight before starting a task.6.