Filter
Top Products
Page 5SKU 97214 For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Capacity Fits most Category 1 Tractors up to 45 HP.
Distance Between Arms 27-1/2”
Maximum Weight Capacity: 2000 lbs., dependent on tractor’s hitch capacity.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
SET UP INSTRUCTIONS
Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
Note: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
Top Hook
Implement
Tractor Lift Arms
Tractor Center Link
Lower
Hook
Clevis Pin (3)
Note: It is recommended that two people assist when connecting this product.
Fasten the Quick Hitch to the tractor’s lift arms using a Clevis Pin (3) with a at 1.
bracket on one end, and secure with linchpins. See illustration above.
Fasten the tractor’s Center Link to the top bracket of the Quick Hitch using a 2.
Clevis Pin (not included).
Adjust the height of the Top Hook and connect it to the implement with a Link Pin 3.
(not included).
REV 09g