Filter
Top Products
Page 6SKU 96549
For technical questions, please call 1-800-444-3353.
MOUNTING
Mount the Engine using the four mounting holes at the base (hardware not supplied).
Select a flat, level location able to withstand the weight, vibration, and the load device
connected to the Engine. If installed indoors, proper exhaust ventilation tubing must
be installed. If installed outdoors, a weatherproof housing is recommended.
Install the Engine load.
The Engine load must be perfectly aligned with the Engine drive shaft to prevent undue
wear on the shaft and bearings. A qualified technician should perform this operation.
OPERATION
Controls and Indicators
Oil Plug (1B)Dip Stick
(8B)
Drain Plug
Muffler (4J)
Engine Switch (6K)
Throttle
(18F)
Choke
(15F)
Gas Valve
Drive Shaft
Fuel Tank Cap (11G)
Air Filter
Drain Plug
Spark Plug (10C)
Starter Pull
Cord (16K)
Filter Cup
(7G)
Muffler (4J)
Oil Plug (1B)
1.
2.