Filter
Top Products
SKU 94344 For technical questions, please call 1-800-444-3353 PAGE 4
6. Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SERVICE
1. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
2. When servicing a tool, use only identical replacement parts. Follow
instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SPECIFIC SAFETY RULES AND PRECAUTIONS
1. WARNING! Your Warranty is voided if:
A. You do not put engine oil in the Engine’s crankcase prior to its first use.
Before each use, check the oil level. Never run the Engine with low or no
engine oil. Running the Engine with low or no oil will permanently damage
the unit. Refer to the Engine manufacturer’s product manual (included)
for complete Engine service and maintenance instructions.
2. This Concrete Vibrator is designed for use only with the Harbor Freight
Tools’ model 94345 Concrete Vibrator Head and Hose. Do not attempt to
use the Concrete Vibrator with any other type of Head and Hose.
3. Maintain labels and nameplates on the Concrete Vibrator. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for
a replacement.
4. Industrial applications must follow OSHA guidelines.
5. Never leave the Concrete Vibrator unattended when its Engine (16) is
running. Turn off the Engine, and wait until it completely stops rotating before
leaving.
5. Check for misalignment or binding of moving parts, breakage of parts, and
any other condition that may affect the tool’s operation. If damaged, have
the tool serviced before using. Many accidents are caused by poorly
maintained tools.