Filter
Top Products
SKU 94344 For technical questions, please call 1-800-444-3353 PAGE 3
PERSONAL SAFETY
1. Stay alert. Watch what you are doing, and use common sense when
operating a power tool. Do not use a power tool while tired or under the
influence of drugs, alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts. Loose
clothes, jewelry, or long hair can be caught in moving parts.
3. Avoid accidental starting. Be sure the Gasoline Engine’s Power Switch is
in its “OFF” position before moving the Concrete Vibrator and before
performing any service, maintenance, or cleaning procedures on the unit.
4. Remove adjusting keys or wrenches before turning the Concrete Vibrator
on. A wrench or a key that is left attached to a rotating part of the machine may
result in personal injury.
5. Do not overreach. Keep proper footing and balance at all times. Proper
footing and balance enables better control of the power tool in unexpected
situations.
6. Use safety equipment. Always wear eye protection. Always wear ANSI-
approved safety impact goggles when using this product. Hearing
protection, helmet, and steel toed shoes must also be used.
TOOL USE AND CARE
1. Do not force the tool. Use the correct tool for your application. The correct
tool will do the job better and safer at the rate for which it is designed.
2. Do not use the Concrete Vibrator if the Gasoline Engine’s Power Switch
does not turn it on or off. Any tool that cannot be controlled with its power
switch is dangerous and must be replaced.
3. Store idle tools out of reach of children and other untrained persons. Tools
are dangerous in the hands of untrained users.
4. Maintain tools with care. Properly maintained tools and equipment are less
likely to bind and are easier to control. Do not use a damaged tool. Tag
damaged tools “Do not use” until repaired.
3. Keep bystanders, children, and visitors away while operating a power tool.
Distractions can cause you to lose control. Protect others in the work area from
debris such as chips and sparks. Provide barriers or shields as needed.