Filter
Top Products
Page 6
SKU 94187 For technical questions, please call 1-800-444-3353
MOUNTING
Mount the Engine using its four mounting holes at the base (hardware not supplied).
Select a flat, smooth location able to withstand the weight, vibration, and the load device
connected to the Engine. If installed indoors, proper exhaust ventilation tubing must be
installed. If installed outdoors, a weatherproof housing is recommended.
Install the Engine load.
The Engine load must be perfectly aligned with the Engine drive shaft to prevent undue
wear on the shaft and bearings. A qualified technician should do this.
OPERATION
Controls and Indicators
Oil PlugDip Stick
Drain Plug
Muffler
On / Off Switch
Throttle
Choke
Gas Valve
Drive Shaft
Fuel Tank Cap
Air Filter
Drain Plug
Spark Plug
Starter Pull Cord
Deposit Cup
Muffler
Oil Plug
1.
2.