Filter
Top Products
Page 15
SKU 94187 For technical questions, please call 1-800-444-3353
Torque Value for Major Engine Bolts
Item Torque Value (ft-lb)
Cylinder Head Bolts 18
Flywheel Bolt 52~59
Crankcase Cover Bolts 18
Connecting Rod 9
Transporting the Engine
Press the Gas Valve to the left (closed) position.
Wait until the engine is cool before lifting and moving.
Keep the Engine level while carrying with another person.
Storing the Engine
Replace the Engine oil with new oil before storing as described on page 13.
Remove the Spark Plug as described on page 12. Add a spoon of new Engine oil
through the Spark Plug mounting hole, into the cylinder. Rotate the driveshaft to dis-
tribute the oil evenly. Replace the Spark Plug. Wipe up any spilled oil.
With a gas can (and funnel, neither included) underneath the Deposit Cup, unscrew
the Drain Plug of the Deposit Cup and drain all the gasoline from the Gas Tank. The
Gas Valve must be open. When drained, replace the Drain Plug. See illustration above,
left.
Pull the Starter Pull Cord slowly, and when it engages keep pulling until the arrow on
the starting sleeve aligns with the hole of the starter. See illustration above, right. This
step ensures that the inlet and outlet valves are closed, preventing a buildup of moisture
and rust within the engine.
Cover the Engine with a waterproof cover.
1.
2.
3.
1.
2.
3.
4.
5.