Filter
Top Products
Page 6For technical questions, please call 1-800-444-3353.SKU 92626
7. Now that the Trailer Jack is fully
assembled, test it by raising the
hitch enough to remove the supports
inserted in Step 2 on page 4.
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
1. With the Handle (10) pulled out so
that the knob is on top, turn the
Handle clockwise. This will raise the
Trailer Jack. Once the trailer is at the
desired height, fold the Handle over
so that the knob is facing downward.
This will lock the Handle in place.
2. To lower a load, turn the Handle
counterclockwise. This will lower the
Trailer Jack. Flip the Handle up and
over when completed to lock the Jack
in place.
3. Secure the trailer in place with wheel
chocks (blocks) on a stable, at and
level surface.
4. Turn the vehicle ignition off and set
the brake.
5. Turn the Handle clockwise to lower
the Foot Plate (11) to the ground.
When the weight is carried by the
jack, unlatch the hitch and continue
turning clockwise until the trailer
tongue is lifted completely off the
hitch ball.
6. The vehicle can now be moved in a
forward direction. Level the trailer by
turning the Handle.
7. Carefully back your vehicle into place
within a foot or two of the trailer
tongue.
8. Raise the Trailer Jack until the hitch
is in a position to clear or t over the
hitch ball.
9. With assistance, roll the Trailer or the
vehicle into position so that the trailer
hitch is directly over the ball hitch.
10. Turn the Handle counterclockwise to
lower the trailer tongue until it is rmly
seated on the ball hitch. Tighten the
trailer hitching mechanism.
11. Continue turning the Handle
counterclockwise until the Trailer
Jack is fully raised.
Operation