Filter
Top Products
Page 3For technical questions, please call 1-800-444-3353.SKU 92626
This enables better control of the
tool in unexpected situations.
d. Dress properly. Do not wear
loose clothing or jewelry. Keep
your hair, clothing and gloves
away from moving parts. Loose
clothes, jewelry or long hair can be
caught in moving parts.
3. Tool use and care
a. Do not force the tool. Do not
attempt to lift more than the 2,000
lb. maximum lifting capacity of
this tool. The correct tool will do
the job better and safer at the rate
for which it was designed.
b. Store idle tools out of reach of
children and do not allow persons
unfamiliar with the tool or these
instructions to operate it. Tools are
dangerous in the hands of untrained
users.
c. Maintain tools. Check for
misalignment or binding of
moving parts, breakage of parts
and any other condition that may
affect the tool’s operation. If
damaged, have the tool repaired
before use. Many accidents are
caused by poorly maintained tools.
d. Use the tool and accessories
in accordance with these
instructions, taking into account
the working conditions and the
work to be performed. Use of the
tool for operations different from
those intended could result in a
hazardous situation.
4. Service
a. Have your tool serviced by a
qualied repair person using only
identical replacement parts. This
will ensure that the safety of the tool
is maintained.
Specic Safety Warnings
1. Do not exceed 2000 Lb. capacity.
2. Use on at, level, hard surface
capable of supporting load.
3. Wear ANSI-approved safety goggles
during use.
4. Prevent trailer wheels from moving by
using wheel chocks while raising or
lowering.
5. Before towing, fully raise trailer jack
and secure properly.
6. Keep out from under jack and tongue
when applying and releasing load,
when jack is supporting load, or when
moving trailer.
7. Inspect before use. Do not use if
parts are loose or damaged.
8. Use in accordance with the
Department of Transportation (DOT)
regulations. Information about DOT
regulations can be found at www.dot.
gov/regulations.html
9. Read manual before installation and/
or use.
10. Maintain labels and nameplates on
the tool. These carry important safety
information. If unreadable or missing,
contact Harbor Freight Tools for a
replacement.
11. This product is not a toy. Keep it out
of reach of children.
12. Not for aircraft purposes.
13. Trailer Jack must always be retracted
when towing the trailer.