Grizzly G0529 Automobile Parts User Manual


  Open as PDF
of 36
 


Spindle Sanding
Never use the Model G0529 for applica-
tions other than those for which it was
made. DO NOT overload the machine or
use excess force when sanding. Severe
personal injury, damage to the machine,
or damage to your workpiece could
occur.
      




To perform spindle sanding operations:
1. 
      

2.         
    


The spindle sander table can be posi-
tioned from 0˚ to 45˚, relative to the plane of
the sanding surface.
3.  


4. 

5. ON
      
Figure 17DO NOT FORCE THE
WORKPIECE AGAINST THE SANDING
SLEEVE
Figure 18
 previous next