Grizzly G0529 Automobile Parts User Manual


  Open as PDF
of 36
 


Installing SpindleMounting Sander
To install the spindle onto the sander:
1. Disconnect the machine from the power
supply
2.      






 
3.        
       

4.       
      Figure 6
Do not over tighten the spindle sleeve,
it could make removal difficult.
Figure 7
Figure 6

         

To mount the sander to the top of the cabinet
stand:
1.        

The Model G0529 weighs
166 lbs. Personal injury
could occur if the
machine is moved with-
out additional assis-
tance. Seek help when
moving or lifting the
machine.
2.          


3. 
 
 
  
 
 
  
Figure 5
 previous next