Filter
Top Products
Edge 605/705 Owner’s Manual 5
GettinG Started
Step 2: Install the
Edge
For the best GPS reception, position
the bike mount so the front of the
Edge is oriented toward the sky. You
can install the bike mount on the
stem or the handlebars. The stem
installation (shown here) provides a
more sturdy location. The optional
wedge should be used under the
mount for a better viewing angle.
To install the Edge on your
bike:
1. Place the wedge on the bike
stem or the handlebars, and
then place the bike mount on
the wedge. Make sure the
release lever is on the left.
Wedge
Bike mount
Release
lever
For bars with a diameter less than
1 in (25.4 mm): Place the additional
rubber pad under the bike mount to
increase the diameter of the bar. The
rubber pad also prevents the mount
from slipping. Continue with step 2.
2. Attach the bike mount
securely using two cable ties.
3. Align the Edge with the bike
mount so that the slots on the
back of the unit are parallel
with the rails on the mount.