Graco 3A1323C Automobile Parts User Manual


  Open as PDF
of 6
 
Install the Power CAN Cables
3A1323C 5
Install the Power CAN Cables
1. Connect cable (517) to J1 on the alternator and to
J7 on the Fluid Control Module (FCM).
2. Connect cable (515) to J3 on the alternator and to
J6 on the Display Module.
3. If your system includes a USB Module, connect
cable (516) to J2 on the alternator and to P3 on the
USB.
4. Close the Control Box. Restore power.
5. See your ProMix 2KE Operation manual for operat-
ing instructions.
FIG. 4. Install Power CAN Cables
ti16456a
J1
Connect cable (517) to J8
on Fluid Control Module
J3
Connect cable (515) to
J6 on Display Module
J2
Connect cable (516) to
P3 on USB Module
(if present)
ti16602a
TI16580a
USB Module
(if present)
Fluid Control Module
ti16604a
J7
Connect cable
(517) here
Display Module
J6
Connect cable
(515) here
P3
Connect cable
(516) here
 previous