Filter
Top Products
Install the Alternator
4 3A1323C
Install the Alternator
1. See FIG. 3. Mount the alternator module (501) to the
control box using four screws (509).
2. Connect the alternator ground wire (511) to the con-
trol box ground terminal (T), using ferrule (512).
Install the Air Regulator
1. Remove the plug from the solenoid manifold (M).
Screw the swivel union (506) into the manifold. See
F
IG. 3.
2. Assemble the air regulator gauge (508), fittings
(503, 504, 507), and safety valve (502) to the regu-
lator (505).
3. Screw the swivel union (506) onto the nipple (503)
to secure the air regulator assembly to the solenoid
manifold (M).
4. Connect the 3/8 in. (10 mm) OD air tube (514)
between the elbow (504) of the air regulator assem-
bly and the alternator air inlet fitting (F).
5. Connect the 1/2 in. (13 mm) OD air exhaust tube
(513) to the alternator air exhaust fitting (E). Extend
the tube out the bottom of the control box through
port (G).
FIG. 3. Install Alternator Components
ti16300b
501
502
504
505
506 503 507
508
509
510
511, 512
T
M
F
FCM
E
G