Filter
Top Products
GH-601 page 18
STOP GOTO
1. In Navigation mode, the Stop GOTO will appear if
the Find Waypoint is enabled.
2. Press STOP GOTO to stop the Find Waypoint
function in map mode.
ALERTS
1. The alert function allows you to setup for GH-601 to
alarm you when a specified condition is met. You
can set the condition by “time”, “distance” or “speed”.
2. In Navigation mode, press ALERTS and then
TIME/DIST ALERT. You can set the alert to OFF,
ONCE or REPEAT. The maximum time you can set
is 99 hours 59 minutes 59 seconds while the
minimum is 10 seconds. The value range for the
distance setting is from 0.01~99.99.
3. In Navigation mode, press ALERTS and then
SPEED ALERT. You can set it to alarm you when
your speed is above or below a value.
4. When you finish setting the value, scroll to the enter
sign (see red circle on the right figure) and press OK
button.