Globalsat Technology BT-308 GPS Receiver User Manual


 
3. System Specification
Electrical Characteristics (Receiver)
Frequency L1, 1575.42 MHz
C/A Code 1.023 MHz chip rate
Channels 12
Sensitivity -170 dBW
Accuracy
Position Horizontal 15m 2D RMS (SA off)
WAAS enabled 10m 2D RMS (SA off)
Time 1 micro-second synchronized to GPS time
Velocity 0.1m/sec 95% (SA off)
Datum
Datum WGS-84
Acquisition Rate
Hot start 8 sec., average (with ephemeris and almanac valid)
Warm start 38 sec., average (with almanac but not ephemeris)
Cold start 45 sec., average (neither almanac nor ephemeris)
Reacquisition 0.1 sec. average (interruption recovery time)
Protocol
GPS Output Data NMEA 0183 protocol, and supports command:
GGA, GSA, GSV, RMC, VTG, GLL (VTG and GLL
are optional)
GPS transfer rate 38400,N,8,1
Dynamic Condition
Acceleration Limit Less than 4g
Altitude Limit 18,000 meters (60,000 feet) max.
Velocity Limit 515 meters/sec. (1,000 knots) max.
Jerk Limit 20 m/sec**3
External antenna
Power 3.3V
Connector MMCX
Power
Voltage Built-in rechargeable battery(900 mAh) and 5V DC
input charging circuit
Operation Time 8 hr. After fully recharged, in continuous mode
>10 hr in trickle power mode
Physical Characteristics
Dimension 85mm x 47mm x 26mm
Weight 98g
Temperature
Operating -20°~ 70°C
Storage -30°~ 80°C
Humidity Up to 95% non-condensing
3.1 Bluetooth Specification
Bluetooth V1.1 Compliant
Supply Voltage : 2.8V ~ 3.3V
Frequency Range : 2.402 ~ 2.480 GHz
Receiver Sensitivity : -80 dBm
Transmit Power : Class 2
Transmitting Range : 3 ~10 m (Depends on environment)
Power Consumption : 45 mA (Typical)