Filter
Top Products
Black plate (13,1)
GMC Acadia/Acadia Denali Owner Manual - 2011
Customer Information 13-13
Collision Damage Repair
(U.S. and Canada)
If the vehicle is involved in a
collision and it is damaged,
have the damage repaired by
a qualified technician using the
proper equipment and quality
replacement parts. Poorly performed
collision repairs diminish the
vehicle resale value, and safety
performance can be compromised
in subsequent collisions.
Collision Parts
Genuine GM Collision parts are
new parts made with the same
materials and construction methods
as the parts with which the vehicle
was originally built. Genuine GM
Collision parts are the best choice to
ensure that the vehicle's designed
appearance, durability, and safety
are preserved. The use of Genuine
GM parts can help maintain the GM
New Vehicle Limited Warranty.
Recycled original equipment
parts may also be used for repair.
These parts are typically removed
from vehicles that were total losses
in prior crashes. In most cases,
the parts being recycled are from
undamaged sections of the vehicle.
A recycled original equipment GM
part may be an acceptable choice
to maintain the vehicle's originally
designed appearance and safety
performance; however, the history
of these parts is not known. Such
parts are not covered by the GM
New Vehicle Limited Warranty, and
any related failures are not covered
by that warranty.
Aftermarket collision parts are also
available. These are made by
companies other than GM and may
not have been tested for the vehicle.
As a result, these parts may fit
poorly, exhibit premature durability/
corrosion problems, and may not
perform properly in subsequent
collisions. Aftermarket parts are
not covered by the GM New Vehicle
Limited Warranty, and any vehicle
failure related to such parts is not
covered by that warranty.
Repair Facility
GM also recommends that you
choose a collision repair facility that
meets your needs before you ever
need collision repairs. The dealer
may have a collision repair center
with GM-trained technicians and
state‐of‐the‐art equipment, or be
able to recommend a collision
repair center that has GM-trained
technicians and comparable
equipment.