Filter
Top Products
Installation
27" Grill Cart Assembly
•Bolt back brace to side panels by installing
bolt with washer from the outside and
secured with nut on the inside. (2 bolts on
each side).
Back Brace
Side Panel
1/4-20 x 1/2
Bolts
1/4 Washer
1/4-20 Nuts
USE
4
EACH
•Check to be sure all panels and holes in the
bottom right corner of the front panel are
correctly aligned.
•Tighten bolts by holding a 7/16" wrench on
bolt and turning nuts below with another
7/16" wrench.
•Snap grommet into the hole on the outside
of the right side panel.
•Place wheel cap onto axle and tap in place
with a mallot.
•Slide a wheel onto the axle with the flat side
against the cap and the spacer side (the
protruding side) towards the inside of the
cart.
•Slide the axle through the holes in the cart.
•Place second wheel onto the axle, with
spacer side against the cart, and tap wheel
cap with mallet to secure.
USE 2
WHEEL CAPS
4
Step 5
Install
Back
Brace
Step 6
Check Panel
Alignment,
Tighten
Assembly
Step 7
Install
Wheels