Filter
Top Products
23
Graphic Target Proling 1350
™
Target ID Guide (Legend)
An illustrated Target ID Guide is located directly
above the LCD screen. When hunting, the Target
ID cursor will appear below the illustration that
most likely indicates the type of target found, based
on its conductivity. Three (3) color-coded bands
correspond with the Small (red), Medium (blue) and
Large (green) target size shown on the Profiling
display.
Upper Scale
The Upper Scale located at the top of the LCD
screen is used to display the Target ID cursor, which
indicates the probable identity of a detected target.
When the Pinpoint button is held down, this scale is
used to display the strength of the Pinpoint target
signal, as a bar increasing from left to right.
Lower Scale
The Lower Scale, or Notch Discrimination Scale,
indicates those regions where the GTP 1350 will or
will not produce an audible signal when a target is
located. Where a notch is present (those regions of