Filter
Top Products
Garrett Metal Detectors
1350 is factory preset with the CUSTOM Mode
set the same as the COINS Mode. By using the
ACCEPT / REJECT touchpad, an operator can
modify the Discrimination settings to individual
specifications, which will be retained in the
CUSTOM Mode.
SENSITIVITY
Press the (+) or (-) touchpad to select the desired
SENSITIVITY level, indicated on the Lower Scale
of the LCD panel. The 1350’s Sensitivity setting
can be adjusted from 3 (least sensitive) to 12
(most sensitive).
The default SENSITIVITY setting is set to 9
(approximately 75 percent). It may be necessary
to reduce the SENSITIVITY setting in locations
where abnormal amounts of interference, trash
or other metal detectors are present. In these
situations, reduce the sensitivity until the audio
becomes stable. When searching for very small
or very deep targets it might be beneficial to
increase the sensitivity setting as much as
14