Filter
Top Products
5
5. Place the suction cup on the windshield.
6. Flip the lever back, toward the
windshield.
7. Fit the bottom of your nüvi into the
cradle.
8. Tilt the nüvi back until it snaps into place.
9. Plug the other end of the vehicle power
cable into a power outlet in your vehicle.
Your nüvi should turn on automatically if
it is plugged in and the vehicle is running.
Step 4: Congure the nüvi
To turn on your nüvi, press and hold .
Follow the on-screen instructions.
Step 5: Acquire Satellites
Go outdoors to an open area, out of garages,
and away from tall buildings. Stop your
vehicle, and turn on the nüvi. Acquiring
satellite signals may take a few minutes.
Step 6: Pair your Bluetooth
®
Headset
You can listen to nüvi audio with your
Bluetooth headset. Your Bluetooth headset
and the nüvi must be turned on and
be within 10 meters of each other. See
your headset owner’s manual for more
information.
1. Touch Tools > Settings > Bluetooth.
2. Enable Bluetooth technology on your
nüvi.
3. Under connections, touch Add or
Change.
4. Enable Find Me/Discoverable/Visible
mode on your headset.
5. Touch OK on the nüvi.
6. Select your headset, and touch OK.
7. Enter the Bluetooth PIN for your headset,
if necessary, and touch Done.
8. Touch OK.