Filter
Top Products
32 iQue M4 Quick Reference Guide
Mount the iQue M4
Suction lever
Suction
cup
Cradle
To install the suction mount:
1. If the mount is not already
assembled, push the ball into the
socket until it clicks into place.
2. Clean and dry the windshield
and the suction cup with rubbing
alcohol.
3. Make sure the suction lever is
up (pulled away from the suction
cup). Position the suction mount
on your windshield. Press the
suction cup firmly against the
glass and rock it to remove as
much air as possible.
4. Press the suction lever down
toward the windshield.
5. Gently slide the iQue M4 down
into the cradle until it clicks into
place.
To remove the suction mount from the
windshield, pull the suction lever up
away from the windshield. If necessary,
pull the tab on the bottom of the suction
cup toward you.
Contact Garmin
If you encounter any difficulty while
using your iQue M4, or if you have any
questions, in the U.S.A. contact Garmin
Product Support at 913/397.8200
or 800/800.1020, Monday–Friday, 8
AM–5 PM Central Time; or by e-mail
at support@garmin.com. In Europe,
contact Garmin (Europe) Ltd. at
44/0870.8501241.
APPENDIX