Filter
Top Products
G3X Installation Manual – Appendix B Page B-3
190-01115-01 Revision A
B.2 Jackscrew Configuration Module Installation into a Jackscrew Backshell
Tables B-2 & B-3 list parts needed to install a Jackscrew Configuration Module with pins or with sockets.
Parts for these installations are included in the 011-00979-20 and 011-00979-22 kits, which are included
in the G3X Installation Kit (K10-00017-00).
Configuration modules are to be installed in the backshells of the P732 connector for the GSU
73, and the P3701 connector for the GDU 37X designated as PFD1.
Table B-2. GPN: 011-00979-20 – Kit (w/EEPROM and pins)
Figure
Ref
Description Qty. Needed GPN or MIL spec
1
Potted Module (w/EEPROM
and Temp.sensor)
1 011-02179-00
3 4 cond. Cable harness 1 325-00122-00
4 Pins Size 22D 4 336-00021-00
10 Pan head screw 1 211-60232-07
Table B-3. GPN: 011-00979-22 – Kit (w/EEPROM and sockets)
Figure
Ref
Description Qty. Needed GPN or MIL spec
1
Potted Module (w/EEPROM
and Temp.sensor)
1 011-02179-00
3 4 cond. Cable harness 1 325-00122-00
9 Socket, Size 20, 26-30 AWG 4 336-00022-01
10 Pan head screw 1 211-60232-07