Garmin GPS 100 GPS Receiver User Manual


 
To enter the waypoint position directly...
· Place the cursor over “ENTER POSN?” and press the ENT key. The
Waypoint Definition Page will appear with the cursor over waypoint
latitude as illustrated below.
· Enter the waypoint latitude.
· Enter the waypoint longitude.
· With the cursor over “OK?”, press the ENT key. The waypoint is now
stored in memory.
To create a waypoint offset from a reference waypoint...
· Move the cursor over “REF WPT?” and press the ENT key. The
Waypoint Definition Page will appear with the cursor over the reference
waypoint name as illustrated below.
· Enter the name of the reference waypoint. The position of the
reference waypoint will be displayed on line 2.
· Enter the bearing from the reference waypoint to the new waypoint.
· Enter the distance from the reference waypoint to the new waypoint.
The resulting waypoint position will be displayed on line 2.
· With the cursor over “OK?”, press the ENT key. The waypoint is now
stored in memory.
4-3