Filter
Top Products
12
To Select a Direct-To Destination
1. Press the direct-to
key. A Select Direct-
To Waypoint page
will appear, with the
waypoint identifier field
highlighted.
2. Use the small and large right knobs to enter the
identifier of the desired destination waypoint.
3. Press ENT to confirm the selected waypoint. Press
ENT again to activate the direct-to function.
To Select a Direct-To Destination from the Map Page
1. Select the map page from the NAV page group.
2. Press the small right knob to display a panning
pointer.
3. Turn the small and large right knobs to place
the panning pointer at the desired destination
location.
4. If the panning pointer is placed on an existing air-
port, navaid or user waypoint, the waypoint name
will be highlighted. Press direct-to and then ENT
twice to activate a direct-to leg to the waypoint.
5. If the panning pointer is placed on an open location
on the map page, press direct-to and then ENT
twice to create a "+MAP" waypoint and activate
a direct-to leg to it.
To Select a Direct-To Destination by Facility Name or
City
1. Press the direct-to key. The Select Direct-To
Waypoint page will appear, with the waypoint
identifier field highlighted.
2. Turn the large right
knob to highlight the
facility name (second
line) or the city (third line)
field.
3. Use the small and large right knobs to enter
the facility name or city location of the desired
destination waypoint. As you spell the facility name
or city, the 400W series Spell’N’Find feature will
select the first entry in the database based upon
the characters you have entered up to that point.
4. Continue turning the small right knob to scroll
through any additional database listings for the
selected facility name or city. You can also scroll
backwards with the small right knob if you scroll
past the desired waypoint.
5. Press ENT to confirm the selected waypoint, and
ENT to activate the direct-to function.
To Select a Nearby Airport or a Flight Plan Waypoint
as a Direct-To Destination
1. Press the direct-to key.
2. Turn the large right knob to highlight the nearest
airport (NRST) or flight plan (FPL) field.
3. Turn the small right knob to display a window
listing nearby airports or all waypoints in the active
flight plan.
4. Continue turning the small right knob to
scroll through the list and highlight the desired
waypoint.
5. Press ENT to confirm the selected waypoint, and
ENT to activate the direct-to function.
DIRECT-TO NAVIGATION