Filter
Top Products
Device Information
Montana 600 Series Owner’s Manual 49
Installing a microSD Card
Memory cards can be used for
additional storage. Also, some maps
are available preloaded on memory
cards. Go to http://buy.garmin.com for
more information.
1. Turn the D-ring counter-clockwise,
and pull up to remove the cover.
2. Remove the batteries or battery.
3. Slide the card holder
➊
toward
the top edge of the device and lift
up, as instructed in the battery
compartment.
➊
➋
4. Place the microSD card
➋
in the
device with the gold contacts facing
down.
5. Close the card holder.
6. Slide the card holder toward the
bottom of the device to lock it.
7. Replace the batteries (page 2).
8. Replace the battery cover, and turn
the D-ring clockwise.
Connecting the Device to a
Computer
notice
To prevent corrosion, thoroughly
dry the mini-USB port, the weather
cap, and the surrounding area before
charging or connecting to a computer.
The lithium-ion battery pack will
charge while connected to the
computer.