Garmin 610 GPS Receiver User Manual


 
nüvi 610/660 Owner’s Manual 3
BASIC OPERATION
GPS Antenna Up
(Parallel to the Ground)
BASIC OPERATION
Turning the nüvi On or Off
Press and hold the
Power button on the top of the nüvi.
Charging the nüvi
To charge the nüvi, use one of the following methods:
Connect the nüvi to the suction mount and the
12/24-Volt car adapter.
Connect the USB cable to the nüvi and your computer.
Connect the AC adapter to the nüvi and wall outlet (included with the nüvi 660).
Acquiring Satellites
Before the nüvi can find your current location and navigate a route, you must do the
following:
1. Go outdoors to an open area, away from tall buildings and
trees.
2. Flip up the GPS antenna on the back of the nüvi, so that it
is parallel to the ground.
3. Turn on the nüvi. Acquiring satellite signals can take a few
minutes.
The bars indicate satellite signal strength. When the bars are green, the nüvi has
acquired satellite signals; now you can select a destination and navigate to it. To use
the nüvi indoors, close the GPS antenna.