Filter
Top Products
GNS 530(A) Quick Reference
NEAREST AIRPORTS
15
190-00181-01 Rev. G
Scrolling through the list of frequencies:
1) Activate the cursor, if not already active, by
pressing the small right knob.
2) Turn the large right knob to move the cursor
through the list of frequencies. If there are
more frequencies in the list than can be
displayed on the display, a scroll bar along the
right-hand side of the display indicates which
part of the list is currently being displayed.
Auto-tuning a frequency from the NAV/
COM Page:
1) Highlight the desired frequency by scrolling
through the list of frequencies, as described in
the preceding procedure.
2) To place a frequency in the standby field of the
COM or VLOC Window, highlight the desired
frequency and press the ENT Key.
BOTTOM ROW ANNUNCIATORS AND
MESSAGES
See Pilot’s Guide for detailed information.
TAWS/TERRAIN
ANNUNCIATOR
PULLUP, TERRAIN,
TERRAIN (Flashing),
TER FAIL,TER INHB,
TER N/A, TER TEST
CDI/RAIM Mode
Approach,
Enroute,
Oceanic,
Terminal,
‘0.30’ (for
VLOC approaches)
Integrity Failure
INTEG
Position Warning
WARN (RAIM protection
limit failure)
Message Annunciator
On,
Flashing (new message),
Blank (no message)
Page Group Indicator
NAV, WPT, AUX, NRST,
FPL, DRCT, PROC, MSG
Waypoint Alert
NEXT DTK, etc.
Turn Advisory
TURN TO_, etc.
OBS Mode
Suspend,
OBS,
Blank (for auto-
sequencing)
Viewing a list of nearest airports:
1) Turn the large right knob to select the NRST
Page Group. ‘NRST’ will appear along the
bottom of the display.
2) If necessary, turn the small right knob to select
the Nearest Airport Page.
Scrolling through the list of nearest airports:
1) From the Nearest Airport Page, press the small
right knob to activate the cursor.
2) Turn the large right knob to scroll through the
list. The scroll bar along the right-hand side of
the page will indicate which part of the list is
currently being viewed.
3) To remove the flashing cursor, press the small
right knob.