Filter
Top Products
44 nüvi 205 and 205W series owner’s manual
Appendix
2. Remove the fuse (glass and silver
cylinder), and replace it with the
appropriate fuse type, which
can be found on the side of the
vehicle adapter.
3. Ensure that the silver tip is placed
in the black end piece. Screw on
the black end piece.
Removing the nüvi and
Mount
To remove the nüvi from the cradle,
hold onto the cradle and tilt the nüvi
forward.
To remove the cradle from the
mount, turn the cradle to the right or
left. Apply pressure in that direction
until the cradle snaps off the mount.
To remove the suction cup mount
from the windshield, ip the lever
toward you. Pull the tab on the
suction cup toward you.
Mounting on Your
Dashboard
Use the enclosed mounting disk to
mount your unit to the dashboard and
comply with certain state regulations.
The
mounting adhesive is extremely
difcult to remove after it is
installed.
1. Clean and dry the dashboard
where you are placing the disk.
2. Remove the backing from the
adhesive on the bottom of the
disk.
3. Place the disk on the dashboard.
4. Remove the clear plastic cover
from the top of the disk.
5. Place the suction cup mount
on top of the disk. Flip the lever
down (toward the disk).