Ford M-6007-XEFMS Automobile Parts User Manual


 
M-6007-XEFMS
340 HP Crate Engine
GUIDE
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD RACING PERFORMANCE PARTS.
IS-1850-0179
Page 13 of 13
Techline 1-800-367-3788
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
The damper assembly
M-6316-D302 (neutral balance) may require a spacer for pulley alignment.
The flywheel included
M-6375-D302 should work for most 157-tooth manual transmission applications. For other
transmission applications, use the proper neutral balance flywheel.
Firing order 1-3-7-2-6-5-4-8 (5.0L HO and 351W order).
Built with current available parts. Photo and specs may vary.
Shipping weight approximately 425 lbs.
QUICK INFO
Intake bolt torque: 16 to 18 ft-lb in 3 steps
Oil: 5 qts 10W30 or 10W40
Timing: 14 to 16 degrees initial, 36 to 38 total with carburetion. 14 to 16 initial with factory EFI
Fuel delivery: 600 cfm carburetor, 30 lb injectors EFI
Distributor gear: steel
Crank pulley spacer: M-8510-D351 recommended for most 4-bolt pulley applications