Ford M-6007-XEFMS Automobile Parts User Manual


 
M-6007-XEFMS
340 HP Crate Engine
GUIDE
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD RACING PERFORMANCE PARTS.
IS-1850-0179
Page 12 of 13
Techline 1-800-367-3788
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
"0" balance billet steel SFI approved flywheel
M-6375-D302 and SFI approved harmonic damper
Forged pistons
Forged steel connecting rods
Hydraulic roller camshaft
M-6250-E303, .498" lift intake and exhaust, duration at .050" is 220 degrees intake
and exhaust
Double roller timing chain set
M-6268-A302
Rear sump pan fits most Fox body cars
Ford Racing aluminum GT-40 cylinder heads
M-6049-X306 with 1.94" intake valves and 1.54" exhaust valves
Roller rocker arms
M-6564-B351
New block, oil and water pumps, oil pan
Can be used in kit cars, street rods, Mustangs, Fox-bodied cars, and trucks
Depending on your application, a crank pulley spacer, or a different timing cover, water pump, performance oil
pan and pickup may be required. See installation notes.
CALL TECHLINE FOR MORE DETAILS
See engine installation and tuning tips.
Some or all of the following items may need to be changed from your original engine or modified for
proper installation:
This engine has a rear sump oil pan and pickup, timing cover and reverse rotation water pump and EFI
valve covers.
A different performance oil pan and pickup may be required for your application. Call the Techline at
1-800-367-3788 for more information.
The timing chain cover will work with most standard rotation water pumps.
Fuel pump eccentric
M-6287-B302 installed, allows use of mechanical fuel pump.
A reverse rotation water pump is installed on the engine. Other applications may require different water pumps
and timing chain covers.
The valve covers
M-6000-K302R should fit most 1986-1993 Mustang EFI applications, optional valve covers
(sold separately).