Filter
Top Products
5
Remote Control Panic Mode
The remote control panic function helps draw attention to your vehicle and yourself in
a threatening situation. Press and hold*** the button on your PowerCode remote
control transmitter to activate the panic function. Pressing the button on the
PowerCode transmitter prior to the end of the 30 second cycle will end the panic
mode.
Illuminated Entry and Exit
When the alarm system is disarmed, the vehicle courtesy lights will turn on for 1
minute, or until the vehicle is started or the system is re-armed.
When the ignition is turned off, the vehicle courtesy lights will turn on for 1 minute, or
until the system is armed.
Memory Seats:
If you vehicle is equipped with memory seats and/or functions, the memory functions
will be activated when you disarm the security system or unlock the doors using the
PowerCode remote control transmitter in the same manner as with the factory
equipped RKE keyfob.
Power Side Sliding Doors (Windstar only):
On Windstars equipped the Power Side Sliding doors, the driver side power sliding
door is controlled by pressing the and buttons together on the PowerCode
remote control transmitter. The passenger side power sliding door is controlled by
pressing the and buttons on the PowerCode remote control transmitter.
Prior to activating the power sliding door with the PowerCode remote control, the all
doors must be unlocked. Pressing the two buttons together the first time will open the
selected door. Then pressing the two buttons together again will close the selected
door.
Power Rear Liftgate Operation (Expedition and Navigator only):
On Expeditions and Navigators equipped the Rear Power Liftgate option, the power
liftgate is controlled by pressing the and buttons together on the PowerCode
remote control transmitter.
Pressing the and buttons together the first time will open the power liftgate,
then pressing the and buttons together again will close the power liftgate.
Express Window Down (LS only):
Press and holding the and buttons together will activate the Express Window
Down function. Release the and buttons when window have gone down to
desired point or hold both buttons until the windows are all the way down.
Power Tonneau Cover Operation (Blackwood only):
On Blackwood, the power tonneau cover is opened by press and holding the and
buttons together on the PowerCode remote control transmitter. The power tonneau
cover is closed by press and holding the and buttons together on the
PowerCode remote control transmitter.
Remote Control Operation (Con’t)