Filter
Top Products
In manual override mode, select or , A/C and recirculated
air
and set the temperature to 60°F (16°C). Set the fan to the
highest speed initially, then adjust to maintain passenger comfort.
To improve the A/C cool down, drive with the windows slightly open for
2–3 minutes after starting the vehicle or until the vehicle has “aired out.”
In extremely cold temperatures, to maximize overall heater performance
it is suggested to not operate the auxiliary system (if equipped) until the
engine temperature gauge crosses into the normal operating range.
To aid in side window defogging/demisting in cold weather:
1. Select
.
2. Press A/C.
3. Adjust the temperature control to maintain comfort.
4. Set the fan to the highest speed.
5. Direct the outer instrument panel vents toward the side windows.
AUXILIARY CLIMATE CONTROL
1.
Fan speed: Turn to select the desired fan speed.
2.
: Distributes air through the rear vents.
3.
: Distributes air through the rear vents and rear-seat floor vents.
4.
: Distributes air through the rear floor vents.
5. Temperature selection: Turn to select air temperature for comfort.
Climate Controls
78
2010 Flex (471)
Owners Guide, 1st Printing
USA (fus)