Ford 2010 F-150 Automobile User Manual


 
VOICE COMMANDS IN CLIMATE MODE
Please refer to the Voice commands in climate mode section of the
Navigation supplement for more information on using voice commands
with the climate control system.
Operating tips
To reduce fog build up on the windshield during humid weather,
select
(defrost). Temperature and/or fan speed can also be
increased to improve clearing.
To reduce humidity build up inside the vehicle: do not drive with the
system off or with
(recirculated air) engaged.
Do not put objects under the front seats that will interfere with the
airflow to the back seats.
Remove any snow, ice or leaves from the air intake area at the base of
the windshield.
To improve the A/C cool down, drive with the windows slightly open
for 2-3 minutes after start up or until the vehicle has been “aired out.”
If you are driving during extreme high ambient temperatures and
idling for extended periods of time in gear, it is recommended to run
the A/C in the MAX A/C mode, adjust the blower fan speed to the
lowest setting and put the vehicle’s transmission in P (Park) to
continue to receive cool air from your A/C system.
For maximum cooling performance MAX A/C in AUTO:
1. Press AUTO control.
2. Set to desired temperature.
For maximum cooling performance MAX A/C in manual override
control
1. Choose
(panel), A/C, and MAX A/C controls.
2. Set the temperature to 60°F (16°C).
3. Set the fan to the highest blower setting.
Climate Controls
70
2010 F-150 (f12)
Owners Guide, 1st Printing
USA (fus)