Ford 2010 F-150 Automobile User Manual


 
Autolock
The autolock feature is available on vehicles with power locking. This
feature will lock all the doors when:
all the doors are closed,
the ignition is in the on position,
you shift into any gear putting the vehicle in motion, (for manual
transmission the park brake should not be engaged) and
the vehicle attains a speed greater than 12 mph (20 km/h).
The autolock feature repeats when:
any door is opened then closed while the ignition is in the on position
and the vehicle speed is 9 mph (15 km/h) or lower and
the vehicle attains a speed greater than 12 mph (20 km/h).
Deactivating/activating autolock
Your vehicle comes with the autolock feature enabled. There are four
methods to enable/disable this feature:
Through your authorized dealer, or
Performing the power door lock control procedure,
Performing the keyless entry keypad (if equipped) procedure, or
Performing the message center (if equipped) procedure.
Power door unlock/lock procedure
Before starting, ensure the ignition is in the off position and all vehicle
doors are closed. You must complete Steps 1-5 within 30 seconds or the
procedure will have to be repeated. If the procedure needs to be
repeated, you must wait 30 seconds. Note: All doors must be closed and
remain closed throughout the configuration process.
1. Turn the ignition to the on
position.
2. Press the power door unlock
control three times.
3. Turn the ignition from the on to
the off position.
4. Press the power door unlock
control three times.
5. Turn the ignition back to the on position. The horn will chirp.
Locks and Security
127
2010 F-150 (f12)
Owners Guide, 1st Printing
USA (fus)