Ford 2010 Escape Hybrid Automobile User Manual


 
3. Press the SET + control and
release it.
4. Take your foot off the accelerator
pedal.
5. The indicator light
on the
instrument cluster will turn on.
Note:
Vehicle speed may vary momentarily when driving up and down a
steep hill.
If the vehicle speed increases above the set speed on a downhill, you
may want to apply the brakes to reduce the speed.
If the vehicle speed decreases more than 10 mph (16 km/h) below
your set speed on an uphill, your speed control will disengage.
Disengaging speed control
To disengage the speed control:
Tap the brake pedal or clutch pedal (if equipped)
Disengaging the speed control will not erase previous set speed.
Note: When you use the clutch pedal to disengage the speed control,
the engine speed may briefly increase, this is normal.
Resuming a set speed
Press the RES control and release
it. This will automatically return the
vehicle to the previously set speed.
Driver Controls
80
2010 Escape Hybrid (ehv)
Owners Guide, 1st Printing
USA (fus)