Filter
Top Products
The Safety Canopy is mounted to roof side-rail sheet metal, behind the
headliner, above the first and second row seats. The Safety Canopy is
designed to inflate between the side window area and occupants to
further enhance protection provided in side impact collisions and rollover
events.
The fact that the Safety Canopy did not activate in a collision does not
mean that something is wrong with the system. Rather, it means the
forces were not of the type sufficient to cause activation. The Safety
Canopy is designed to inflate in certain side impact collisions or rollover
events, not in rear impact, frontal or near-frontal collisions, unless the
collision causes sufficient lateral deceleration or rollover likelihood.
WARNING: Several Safety
Canopy System
components get hot after inflation.
Do not touch them after inflation.
WARNING: If the Safety Canopy System has deployed, the
Safety Canopy will not function again unless replaced. The
Safety Canopy System (including the A, B, C, and D pillar trim and
headliner) must be inspected and serviced by an authorized dealer. If
the Safety Canopy is not replaced, it will not function again, which
will increase the risk of injury in a future collision.
Determining if the system is operational
The SRS uses a readiness light in the instrument cluster or a tone to
indicate the condition of the system. Refer to Airbag readiness in the
Instrument Cluster chapter. Routine maintenance of the side airbag is
not required.
Seating and Safety Restraints
154
2010 Escape Hybrid (ehv)
Owners Guide, 1st Printing
USA (fus)